Electric impact drill ZDP-700 profi is used for drilling holes, as well as for screwing and unscrewing screws and screws when performing carpentry and locksmith work.
Functionality:
-
drilling holes in structures made of metals, plastic, wood and other materials in the drilling mode;
-
drilling holes in structures made of building materials (concrete, brick, stone) in the drilling mode with axial impact with the right spindle rotation;
-
screwing screws and screws with the right rotation of the spindle and unscrewing with the left rotation;
-
Limiting the drilling depth using a handle with a drilling depth stop.
Electric impact drill ZDP-700 pro has:
-
Toothed three-jaw chuck.
-
Electronic regulator/switch for smooth change of speed and power, depending on the nature of the work performed.
-
Spindle speed regulator-limiter.
-
Spindle rotation direction switch.
-
Mode switch.
The drill should be operated in the range of operating temperatures from+5°C to+40°C, relative air humidity not more than 80% and the absence of direct exposure to atmospheric precipitation and excessive dustiness.
Key Features:
Rated power, W 700
Rated current, A 3.2
Rated voltage, V ~ 220 ±10%
Rated current frequency, Hz 50
Electric motor, single-phase collector with double insulation
Product class II
Chuck size, mm 13
Spindle speed, rpm 0-2800
Drilling diameter, mm:
-
tree 2-25
-
steel 2-13
-
concrete 2-16
Net/gross weight, kg 1.65-1.85
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
