ЧП Ворон. Электронные компоненты и радиомонтажное оборудование. Микросхемы, транзисторы, реле, резисторы, конденсаторы, паяльное оборудование, припой.
Корзина пуста!
ВХОД ДЛЯ КЛИЕНТОВ

Забыли пароль?
Зарегистрироваться

УВАГА! Шановні клієнти магазину в м.Дніпро!

З 18.12.23 магазин в м.Дніпро за адресою вул.Новокримська 58 не працює.
Однак, наш інтернет-магазин відкритий для вас 24/7.
Усі місцеві замовлення можуть бути відправлені кур'єрськими службами.




Поиск:

Enter a search string or click on the microphone icon and begin speaking.

×
История запросов
ваша история поиска пуста
Whole catalog Tools and equipmentWorkplace equipmentOpticsHead-mounted binocular loupes
Код товара:
024518

Binoculars MG81001-H

Head-mounted binocular loupe with a set of interchangeable lenses. 11 degrees of magnification from x1.0 to x6.0. Adjustable LED backlight. Improved head fixation system.
Binoculars MG81001-H
In stock
704,60 UAH × = 704,60 UAH
from 1 pc : 704,60 UAH
from 4 pcs : 690,70 UAH ( -2,0%)
from 8 pcs : 676,60 UAH ( -4,0%)

Current balances:

Магазин-Днепр
1 pc
For Online Orders
1 pc

Изображение товара

Product description format_size zoom_out zoom_in

Head-mounted binocular loupe with variable magnification.
Lightweight replaceable plastic lenses - set of 5 in a case.
Ergonomic clip-hoop with a grooved rubber lining, does not get tired during prolonged wear.
The difference from a similar model MG81001-G  is the additional transverse tape of the hoop, which runs over the head, through the crown . This tape is also adjustable in length. The fixation in two planes guarantees a stable attachment of the binoculars to the head, even during active movement (for example, mounting equipment on an object, etc.)
The length of the hoop is adjusted by turning the tensioning gear mechanism.
The visor is attached to the hoop with two wing nuts. The mobility of the visor hinge is regulated by the degree of tightening of the nuts.
Removable LED-lamp in the center of the visor, extends forward, the angle of inclination changes. The flashlight can be used separately from binoculars. It also makes sense to remove the flashlight when the workplace is well lit, in which case the visor becomes noticeably lighter.
Light source - 2 pcs of white LED. There is no brightness control. A simple, reliable button with fixation, covered with a rubber pad.
Power supply for the backlight: batteries 3 x 1.5 V - R03 (AAA).
 
Change the magnification by setting the appropriate lenses one at a time, or a combination of two lenses. When two lenses are installed, the magnification ratio is summed up.
The magnification ratio of the lenses that come with this binocular model:
  • x1.0
  • x1.5
  • x2.0
  • x2.5
  • x3.5
It should be borne in mind that the focal length depends on the magnification of the magnifying glass. The higher the magnification, the shorter the focusing distance.

magnification when installing the 1st lens focal length, mm magnification when attaching 2 lenses focal length, mm
x 1.0 300-350 x 3.0 160-180
x 1.5 240-260 x 4.0 125-135
x 2.0 215-235 x 4.5 110-130
x 2.5 205-225 x 5.0 100-120
x 3.5 135-145 x 5.5 80-95
    х 6.0 60-85

Completeness:
  • binocular glasses - 1 piece
  • a set of interchangeable lenses in a pencil case - 5 pieces
  • AAA batteries - 3 pcs.

Only registered users can leave feedback and ask questions

The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.

If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Ярослав unknown

Buy with this product: Посмотреть больше…