Web Speech API is not supported by this browser. Install Google Chrome.
Voice input also works in Safari, Yandex, as well as mobile browsers Huawei, Opera and Samsung..
Steel magnetic tips are installed at the bottom end of the handle.
The upper end of the handle is closed by an aluminum cap with a rotating stop on a ball bearing. Replaceable tips are folded inside the handle.
A rotating ring is installed below the grooved part of the handle, for which it is convenient to hold the screwdriver during operation.
Cue ball tips, steel, one-sided, hexagonal, 3 mm.
The tip surface is coated with wear-resistant titanium nitrite TiN (yellow).
The working length of the handpiece is 25 mm.
The blade diameter of the tip of the central part is 2.3 mm. This must be taken into account when working with screws deeply recessed into housings.
handle length: 105 mm
diameter of the knurled part of the handle: 14 mm
tip length: 33/25 mm
working tip length: 25 mm
Composition of tips:
torx T4
torx T6
cross +1.5 mm (with a flat end and a micro pin in the center)
slot -2.0 mm
five-point sprocket 0.8 mm (for iPhone)
hex socket 3.0mm
Completeness:
handle - 1 piece
double-sided tips - 6 pcs (inside the handle)
Only registered users can leave feedback and ask questions
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
To carry out technical calculations and obtain the exact parameters of the goods, use the datasheets from the manufacturer's website.
If you need additional information, or you found an error in the description, or have other questions about this product, then our manager will help you: Евгений ЗП
unknown
The data presented in the product description are for reference only and may differ from those indicated by the manufacturer.
